[DC] Halé Mod

Hier findest Du alltägliche Tutorials zum Umbauen von Stiften.
Forumsregeln
Wichtig! Vor dem Posten die Forenregeln lesen!
Antworten
Mayu
Trinkgeldgeber(in)
Beiträge: 138
Registriert: 04.08.14 08:12
Postleitzahl: 50933
Land: Deutschland

[DC] Halé Mod

Beitrag von Mayu »

So, nun mal ein leichter Mod, welcher sehr leicht zu bauen ist.
Die Mats dazu bekommt man eig. auch alle recht einfach.


Halé Mod

[img]http://66.90.122.10/mayu/pictures/halemod/13.jpg[/img]


Stats
Length: 20-20,5cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A
___________________________________

Materials List
Doppelfasermaler (Caps)
Pic 01 – Pic 02
HGG 2x (Caps)
Signo Broad 2x (Tips)
SuperPirate Body 1x
Anyball Grip 2x

If you're interested in these "Doppelfasermaler" - pack is 3,49€ (12 pens) - 4,25$ - i can send you these, they are amazing for modding imo.
Basic tools: Knife, Lighter, Hammer, Something like the tip in my picture
As you can see from the material list, this colors of this mod are highly configurable – make the mod look like you like it!
___________________________________

Step 01
Gather your Materials - HGG 2x | Signo Broad 2x | Super Pirate Body | Anyball Grip 2x | VIVESS Doppelfasermaler
[img]http://66.90.122.10/mayu/pictures/halemod/01.jpg[/img]

Step 02
Remove the parts we need for this Mod - HGG Caps 2x | Signo Tip 2x | Doppelfasermaler Caps 2x | SP Body |Anyball Grip 2x
[img]http://66.90.122.10/mayu/pictures/halemod/02.jpg[/img]

Step 03
Remove the Clips from the HGG Caps and cut it so no edges are left - no matter how it looks in the end. Also remove the Sticker
[img]http://66.90.122.10/mayu/pictures/halemod/03.jpg[/img]

Step 04
Put the Signo tips into the HGG Caps like shown.
[img]http://66.90.122.10/mayu/pictures/halemod/04.jpg[/img]

Step 05
Hammer out the inside of the Doppelfasermaler Caps. Keep both parts
[img]http://66.90.122.10/mayu/pictures/halemod/05.jpg[/img]

Step 06
Cut the inside of the Cap, so you have a 0,5cm long piece of the end
[img]http://66.90.122.10/mayu/pictures/halemod/06.jpg[/img]

Step 07
Cut the little leftovers around the Plug
[img]http://66.90.122.10/mayu/pictures/07.jpg[/img]

Step 08
Push the Plugs into the Signo Tips, It should fit perfect! Push them all in!
[img]http://66.90.122.10/mayu/pictures/halemod/08.jpg[/img]

Step 09 (sry for bad quality!)
Cut the Anyball Grips like shown. Start on the bigger side and cut 7 and 1 ring
[img]http://66.90.122.10/mayu/pictures/halemod/09.jpg[/img]

Step 10
Push the HGG Cap into the Anyball Grip
[img]http://66.90.122.10/mayu/pictures/halemod/10.jpg[/img]

Step 11
Pus the HGG Cap into the Cap of the Doppelfasermaler Cap like shown
[img]http://66.90.122.10/mayu/pictures/11.jpg[/img]

Step 12
Add 1 Ring of Anyball on each side and add the Caps - your very own Halé; Mod
[img]http://66.90.122.10/mayu/pictures/halemod/12.jpg[/img]
Zuletzt geändert von Mayu am 12.01.15 17:09, insgesamt 1-mal geändert.

Benutzeravatar
BTS
Beiträge: 199
Registriert: 07.10.12 21:52
Penspinner seit: 0- 0-2012
Postleitzahl: 27318
Land: Deutschland
Wohnort: Niedersachsen

Re: [DC] Halé Mod

Beitrag von BTS »

Nice, gute idee mit den hgg caps. Endlich ma ne Möglichkeit, die vernünftig zu verbraten.
Photobucket: http://s1279.photobucket.com/user/iBTS/ ... t=3&page=1
Modding-Anleitungen: https://bts-ps.jimdo.com/news/
Jeder Mensch hat ein Recht auf meine Meinung !


METTLER ONLY

Benutzeravatar
Reaper_GPC
Beiträge: 57
Registriert: 08.04.15 22:25
Postleitzahl: 88289
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Reaper_GPC »

Wo gibts die doppelfasermaler in Deutschland?

Mayu
Trinkgeldgeber(in)
Beiträge: 138
Registriert: 04.08.14 08:12
Postleitzahl: 50933
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Mayu »

Bei REWE von VIVESS. Deren Hauseigenes Nonfood Sortiment

Benutzeravatar
Reaper_GPC
Beiträge: 57
Registriert: 08.04.15 22:25
Postleitzahl: 88289
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Reaper_GPC »

Hatte glaub ich sogar mal relativ ähnliche tintenkiller auch von rewe. Danke für die schnelle Antwort werd mir definitiv ein paar packs kaufen!

Mayu
Trinkgeldgeber(in)
Beiträge: 138
Registriert: 04.08.14 08:12
Postleitzahl: 50933
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Mayu »

Ja die haben auch tks mit diesen caps in weiß und dunkelblau :)

Benutzeravatar
Reaper_GPC
Beiträge: 57
Registriert: 08.04.15 22:25
Postleitzahl: 88289
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Reaper_GPC »

Simd das die mit einer ner cap ? Icj krieg die nämlich nicht auf comsssa caps

Mayu
Trinkgeldgeber(in)
Beiträge: 138
Registriert: 04.08.14 08:12
Postleitzahl: 50933
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Mayu »

Die mit einer cap sind zu klein. Es müssen die doppelfasermaler sein. Die sind dicker. Aber ne comssa cap kommt in meinem tut nicht vor^^

Benutzeravatar
Reaper_GPC
Beiträge: 57
Registriert: 08.04.15 22:25
Postleitzahl: 88289
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Reaper_GPC »

war auch für das andere noch gemeint :) Danke für dieAntwort

Benutzeravatar
Might
Beiträge: 1755
Registriert: 29.08.08 15:06
Postleitzahl: 30938
Land: Deutschland

Re: [DC] Halé Mod

Beitrag von Might »

hale bery mod
Bild
Alles Schnarchnasen und Weicheier hier außer -> https://www.youtube.com/watch?v=HSCsGGMpNvM P.S Abonaten not forgaten!

Antworten